Tyre Inflation Pressure
Important The required tyre pressures are shown on a sticker on the driver’s door pillar page 9-2
WARNING
Always inflate the tyres to the correct pressure:
Over-inflation or under-inflation of tyres is dangerous.
Adverse handling or unexpected tyre failure could result in a serious accident.
Refer to Tyres on page 9-9.
Use only a Mazda-genuine tyre valve cap:
Use of a non-genuine part is dangerous as the correct tyre air pressure cannot be maintained if the tyre valve becomes damaged.
If the vehicle is driven under this condition, the tyre air pressure will decrease which could result in a serious accident.
Do not use any part for the tyre valve cap that is not a Mazda-genuine part.
Inspect all tyre pressures monthly (including the spare*) when the tyres are cold.
Maintain recommended pressures for the best ride, handling, and minimum tyre wear.
Refer to the specification charts (page 9-9).
NOTE
* Always check tyre pressure when tyres are cold.
* Warm tyres normally exceed recommended pressures.
Do not release air from warm tyres to adjust the pressure.
* Under-inflation can cause reduced fuel economy, uneven and accelerated tyre wear, and poor sealing of
the tyre bead, which will deform the wheel and cause separation of tyre from rim.
* Over-inflation can produce a harsh ride, uneven and accelerated tyre wear, and a greater possibility of
damage from road hazards.
Keep your tyre pressure at the correct levels.
If one frequently needs inflating, have it inspected.
* Some models.
